Sistema de pré-aquecimento do motor para Rolls Royce WRAITH 2013 -
Sistema de pré-aquecimento do motor para Rolls Royce WRAITH
Power:
Dimensions:
Lenght:
Todos os filtros
Power consumption:
Connector diameter:
Resultados encontrados: 10
ENGINE HEATER TT-THERMO 1000XC ( READY-TO-INSTALL)
Código do item:
AL51314717
-
Enviamos para
United StatesPodemos enviar este produto para United States e para outros países. Pode ver o preço de entrega no carrinho de compras.
Temos várias opções de entrega para a United States. Pode ver a data e o custo de entrega no carrinho de compras.
Pode rastrear a sua encomenda com um link de rastreio dedicado que receberá imediatamente após o pagamento da sua encomenda. -
157.50-12%137.84 eur -
-
157.50 - Preço com desconto
- 137.84 eur
-
- Poupa 19.66 eur (-12%)
-
- na loja
- 3 pçs
-
data de entrega:
19.04.2024, 22:52
- Adicionar ao carrinho
CONSULTE MAIS INFORMAÇÃO
-Heater intended for 4-6 cyl. engines.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 1000XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 1000XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
Splashproof connection cable
Código do item:
AL14332844
-
Enviamos para
United StatesPodemos enviar este produto para United States e para outros países. Pode ver o preço de entrega no carrinho de compras.
Temos várias opções de entrega para a United States. Pode ver a data e o custo de entrega no carrinho de compras.
Pode rastrear a sua encomenda com um link de rastreio dedicado que receberá imediatamente após o pagamento da sua encomenda. -
29.33-13%25.46 eur -
-
29.33 - Preço com desconto
- 25.46 eur
-
- Poupa 3.87 eur (-13%)
-
- pode ser encomendado
- 5 pçs
-
data de entrega:
26.04.2024, 11:55
- Adicionar ao carrinho
Connector: |
|
Current: |
Max 16A
|
Lenght: |
1,5M
|
Voltage: |
AC 220-240 V
|
CONSULTE MAIS INFORMAÇÃO |
DEFA PlugIn connectors do not require any tools to make a safe connection. Therefore, you can install them without the help of a qualified electrician.
cable 1.5m
Defa compatible heating cable - Locking fork connection
Código do item:
AL33773500
-
Enviamos para
United StatesPodemos enviar este produto para United States e para outros países. Pode ver o preço de entrega no carrinho de compras.
Temos várias opções de entrega para a United States. Pode ver a data e o custo de entrega no carrinho de compras.
Pode rastrear a sua encomenda com um link de rastreio dedicado que receberá imediatamente após o pagamento da sua encomenda. -
37.50 eur
- Preço: 37.50 eur
-
- pode ser encomendado
- 5 pçs
-
data de entrega:
26.04.2024, 11:55
- Adicionar ao carrinho
CONSULTE MAIS INFORMAÇÃO
Defa compatible instrument socket / element cable - Defa compatible heating cable - Locking fork connection
ENGINE HEATER TT-THERMO 500XC ( READY-TO-INSTALL)
Código do item:
AL73974230
-
Enviamos para
United StatesPodemos enviar este produto para United States e para outros países. Pode ver o preço de entrega no carrinho de compras.
Temos várias opções de entrega para a United States. Pode ver a data e o custo de entrega no carrinho de compras.
Pode rastrear a sua encomenda com um link de rastreio dedicado que receberá imediatamente após o pagamento da sua encomenda. -
138.75-12%122.29 eur -
-
138.75 - Preço com desconto
- 122.29 eur
-
- Poupa 16.46 eur (-12%)
-
- pode ser encomendado
- 5 pçs
-
data de entrega:
26.04.2024, 11:55
- Adicionar ao carrinho
CONSULTE MAIS INFORMAÇÃO
-Heater intended for 1-3 cyl. engines.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 500XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 500XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
ENGINE HEATER TT-THERMO 1000XC
Código do item:
AL33724026
-
Enviamos para
United StatesPodemos enviar este produto para United States e para outros países. Pode ver o preço de entrega no carrinho de compras.
Temos várias opções de entrega para a United States. Pode ver a data e o custo de entrega no carrinho de compras.
Pode rastrear a sua encomenda com um link de rastreio dedicado que receberá imediatamente após o pagamento da sua encomenda. -
149.17-14%128.29 eur -
-
149.17 - Preço com desconto
- 128.29 eur
-
- Poupa 20.88 eur (-14%)
-
- pode ser encomendado
- 5 pçs
-
data de entrega:
26.04.2024, 11:55
- Adicionar ao carrinho
Power: |
1000 W
|
Dimensions: |
150 mm x 90 mm x 80 mm
|
Pipe diameter: |
⏀16 mm - ⏀20 mm
|
Connector diameter: |
17 mm
|
Pump throughput capacity: |
8 l/min
|
Power consumption: | ALL PROPERTIES |
Power consumption: |
4,3 A
|
Frequency: |
50/60 Hz
|
Voltage: |
AC 220-240 V
|
CONSULTE MAIS INFORMAÇÃO |
A device that allows you to warm up the engine without starting it. Designed to preheat the engine, to facilitate starting the engine in cold weather and, in some cases, to warm the air in the vehicle cabin.
Weight 0.95 kg
Dimensions Length 150 mm Width 95 mm Height 95 mm
Voltage AC 220-240 V
Frequency 50/60 Hz
Power 1000 W
Power consumption 4.3 A
Compatibility Defa
Connector diameter 16 mm
Manufacturer TT-THERMO
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
ENGINE HEATER TT-THERMO 1500XC ( READY-TO-INSTALL
Código do item:
AL51314719
-
Enviamos para
United StatesPodemos enviar este produto para United States e para outros países. Pode ver o preço de entrega no carrinho de compras.
Temos várias opções de entrega para a United States. Pode ver a data e o custo de entrega no carrinho de compras.
Pode rastrear a sua encomenda com um link de rastreio dedicado que receberá imediatamente após o pagamento da sua encomenda. -
155.83-12%136.38 eur -
-
155.83 - Preço com desconto
- 136.38 eur
-
- Poupa 19.45 eur (-12%)
-
- pode ser encomendado
- 5 pçs
-
data de entrega:
26.04.2024, 11:55
- Adicionar ao carrinho
CONSULTE MAIS INFORMAÇÃO
-Heater intended for 6+ cyl. engines.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 1500XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-Thermo XC is the only hose-heater model on the market where the liquid and electrical sides are completely separate due to the patented design. This design maximizes the electrical safety of the device, and makes the model exceptional in the market.
- Ready-to-install package includes TT-THERMO 1500XC heater, Defa compatible element cable / socket 1.5m and Defa compatible 2.5m heating cable. (The color of the cable may differ from the picture)
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
ENGINE HEATER TT-THERMO 1500XC
Código do item:
AL30750421
-
Enviamos para
United StatesPodemos enviar este produto para United States e para outros países. Pode ver o preço de entrega no carrinho de compras.
Temos várias opções de entrega para a United States. Pode ver a data e o custo de entrega no carrinho de compras.
Pode rastrear a sua encomenda com um link de rastreio dedicado que receberá imediatamente após o pagamento da sua encomenda. -
157.17-12%138.69 eur -
-
157.17 - Preço com desconto
- 138.69 eur
-
- Poupa 18.48 eur (-12%)
-
- pode ser encomendado
- 5 pçs
-
data de entrega:
26.04.2024, 11:55
- Adicionar ao carrinho
Power: |
1500 W
|
Dimensions: |
151 mm x 90 mm x 75 mm
|
Lenght: |
151 mm
|
Pipe diameter: |
⏀16 mm - ⏀20 mm
|
Connector diameter: |
17 mm
|
Weight: | ALL PROPERTIES |
Weight: |
880g
|
Pump throughput capacity: |
8 l/min
|
Power consumption: |
6,2 A
|
Frequency: |
50/60 Hz
|
Voltage: |
AC 220-240 V
|
CONSULTE MAIS INFORMAÇÃO |
The genuine and original TT-Thermo engine heater is suitable for almost all motor vehicles!
New generation hose heater with circulating water pump. Power 1500W
Externally more compact in size than previous Kld2 models
Our only model that is completely free to install in any position. No limited mounting angle or position
The resistors inside the heat exchanger are not directly in the liquid, so the resistors do not burn from the air bubbles in the system
Pump bearings reinforced and improved
Improved pump performance
All experiences of previous models have been taken into account in the design
Higher quality materials and components
Designed in Finland
Defa compatible connector
Hose outlet diameter 17mm
You can find the hose bends that may be needed for installation in our online store
Forget the inefficient engine heater!
Weight 0.95 kg
Dimensions Length 150 mm Width 95 mm Height 95 mm
Voltage AC 220-240 V
Frequency 50/60 Hz
Power 1500 W
Power consumption 4.3 A
Compatibility Defa
Connector diameter 16 mm
Manufacturer TT-THERMO
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-THERMO 2200XC 18mm
Código do item:
AL51314701
-
Enviamos para
United StatesPodemos enviar este produto para United States e para outros países. Pode ver o preço de entrega no carrinho de compras.
Temos várias opções de entrega para a United States. Pode ver a data e o custo de entrega no carrinho de compras.
Pode rastrear a sua encomenda com um link de rastreio dedicado que receberá imediatamente após o pagamento da sua encomenda. -
164.83 eur
- Preço: 164.83 eur
-
- pode ser encomendado
- 5 pçs
-
data de entrega:
26.04.2024, 11:55
- Adicionar ao carrinho
CONSULTE MAIS INFORMAÇÃO
Designed for large machines such as work vehicles, trucks, etc.
New generation heater with water circulation pump. Power 2200W, adjustable connection angle.
No restrictions on installation angle or position
Defa compatible connector
Adjustable connection angle
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
New generation heater with water circulation pump. Power 2200W, adjustable connection angle.
No restrictions on installation angle or position
Defa compatible connector
Adjustable connection angle
Pre-starting electric engine heaters are a solution for cars in times of cold and frost. Comfort - for you, care - for your car.
A cold engine start, for example in 30 degree frost, is equivalent to 500 km of vehicle mileage. In a cold engine, the viscosity coefficient of the lubricant becomes higher, and the load on the equipment increases.
How does cold starting a car affect the life of the starter? - For several reasons, during a cold start, the starter is the first to suffer: Thickened oil makes it difficult for the crankshaft to rotate. The battery uses more energy to start the engine. Gasoline evaporates more slowly and does not ignite easily. The viscosity of diesel fuel increases, making it more difficult for it to leak into the combustion chamber.
Engine wear during cold starts: Due to frequent cold starts, they contribute to more expensive repairs than replacing the starter and battery. The problem is that at negative temperatures all components lose volume, and the gap between the parts increases slightly. Therefore, cold starting a car helps reduce compression, as more fuel goes into the crankcase between the piston rings and the cylinder walls. Increased fuel consumption is not as bad as its consequences, because the more gasoline or diesel fuel gets into the engine oil, the faster the lubricant loses its properties. Therefore, if you frequently cold start the engine, wear is guaranteed on the following parts: crankshaft journals; main and connecting rod bearings; crankshaft support bearings.
All these parts are lubricated by engine oil, and if it loses its properties, the wear of these components accelerates.
All this together leads to the fact that cold starting a car negatively affects the life of the starter. Due to increased energy consumption and excessive load, the likelihood of insulation breakdown between the windings or their complete failure increases.
A pre-starting, electric engine heater will help solve the problem. We suggest you purchase a ready-made version of the pre-start engine system, which includes all the necessary equipment and simple installation instructions.
How to make starting a cold engine safe? – Install pre-starting electric engine heaters! Take care of your iron friend.
TT-THERMO 2200XC 20mm
Código do item:
AL35880284
-
Enviamos para
United StatesPodemos enviar este produto para United States e para outros países. Pode ver o preço de entrega no carrinho de compras.
Temos várias opções de entrega para a United States. Pode ver a data e o custo de entrega no carrinho de compras.
Pode rastrear a sua encomenda com um link de rastreio dedicado que receberá imediatamente após o pagamento da sua encomenda. -
188.33-5.9%177.21 eur -
-
188.33 - Preço com desconto
- 177.21 eur
-
- Poupa 11.12 eur (-5.9%)
-
- pode ser encomendado
- 5 pçs
-
data de entrega:
26.04.2024, 11:55
- Adicionar ao carrinho
CONSULTE MAIS INFORMAÇÃO
A new generation hose heater with a circulating water pump. Power 2200W, adjustable angle in connection.
Intended for large machines, such as work machines, trucks, etc.
Externally more compact than previous Kld2 models
Our only model that is completely free to install in any position
No limited installation angle or position
The resistors inside the heat exchanger are not directly in the liquid, therefore the resistors do not burn from air bubbles in the system
Pump bearing strengthened and improved
Improved pump performance
All the experiences of previous models have been taken into account in the design
Higher quality materials and components than before
Designed in Finland
Defa compatible connector
Adjustable angle at the connection
You can find the hose bends that may be needed for the installation in our online store.
Forget the inefficient radiant heater!
Intended for large machines, such as work machines, trucks, etc.
Externally more compact than previous Kld2 models
Our only model that is completely free to install in any position
No limited installation angle or position
The resistors inside the heat exchanger are not directly in the liquid, therefore the resistors do not burn from air bubbles in the system
Pump bearing strengthened and improved
Improved pump performance
All the experiences of previous models have been taken into account in the design
Higher quality materials and components than before
Designed in Finland
Defa compatible connector
Adjustable angle at the connection
You can find the hose bends that may be needed for the installation in our online store.
Forget the inefficient radiant heater!
ENGINE HEATER TT-THERMO 1500KLD
Código do item:
AL14332360
-
Enviamos para
United StatesPodemos enviar este produto para United States e para outros países. Pode ver o preço de entrega no carrinho de compras.
Temos várias opções de entrega para a United States. Pode ver a data e o custo de entrega no carrinho de compras.
Pode rastrear a sua encomenda com um link de rastreio dedicado que receberá imediatamente após o pagamento da sua encomenda. -
117.50 eur
- Preço: 117.50 eur
- no stock do fornecedor: NÃO DISPONÍVEL
Fluid: |
Coolant, Glycol - G11, G12
|
Power cord: |
DEFA compatible cables
|
Power: |
1500 W
|
Dimensions: |
150 mm x 90 mm x 80 mm
|
Pipe diameter: |
⏀16 mm - ⏀20 mm
|
Connector diameter: | ALL PROPERTIES |
Connector diameter: |
⏀16 mm -⏀17 mm
|
Weight: |
880g
|
Pump throughput capacity: |
8 l/min
|
Power consumption: |
6,2 A
|
Frequency: |
50/60 Hz
|
Voltage: |
AC 220-240 V
|
CONSULTE MAIS INFORMAÇÃO |
installation options than the model with a direct hose connection. The connection of the heater to the electricity network is
With a connector compatible with the Defa system. If the need for installation length to the one in the car
to the electric cable system is long, we also have Defa-compatible armored 1.5m available separately
long extension cord.
The operating principle of the heater is simple: it simultaneously heats and circulates the coolant
in the engine. Therefore, the engine heats up evenly everywhere and the vehicle's interior quickly when the vehicle is started.
Thanks to the even heating of the engine, the heater is also excellently suitable for new vehicles that do not
can use a traditional block heater.
The heater is easy to install and reliable. In general, the best place for installation is the water hose between the engine and the interior heater. The heater has a built-in thermostat that keeps the temperature at +65..+75
degree. The pump circulates the heated liquid all the time. In this way, the heat is efficiently transferred to the engine. Thanks to the thermostat, the heater can be turned on without the risk of overheating.
Delivery includes: Engine heater with Defa-compatible connector, water hose clamps, installation and user manual in Finnish.
Deliveries directly from the warehouse of the importer Suomen Tuontiekniikka Oy. Delivery time 2-5 days.
The heater is CE-marked and has a 1-year warranty from the date of purchase.
Technical information:
Voltage AC 220-240 V
Frequency 50/60 Hz
Power 1500 W
Power consumption 6.2 A
Power cord Defa compatible cables
Pump capacity 8 l/min
Fluid Coolant, Glycol - G11, G12
Dimensions 150 mm x 90 mm x 80 mm
Weight 880 g (without power cord)
Connections Ø 16 mm – shoulder Ø 17 mm
Hoses Internal diameter
Ø 16 mm – 20 mm
Sistemas de aquecimento para Rolls Royce WRAITH
Todas as peças para Rolls Royce WRAITH
- Produtos com desconto
- Retentor, válvula injectoraNEW! -46%
- Sistema de pré-aquecimento do motor
- Tubo flexível de travãoNEW! -36%
- Tampa, caixa do filtro de óleoNEW! -35%
- Braço de controloNEW! -35%
- Casquilho de apoio, braço transversalNEW! -35%
- Barra/escora, suspensãoNEW! -35%
- Sensor da pressão de admissãoNEW! -35%
- Sensor, pressãodos gases de escapeNEW! -35%
- Válvula de expansãoNEW! -35%
- Jogo de rolamentos de rodaNEW! -35%
- Suspensão da caixa de velocidadesNEW! -35%
- Radiador de óleoNEW! -34%
- Filtro de combustívelNEW! -33%
- Conjunto do filtro hidráulico, caixa velocidades automáticaNEW! -32%
- Jogo de maxilas de travãoNEW! -32%
- Ventilador do habitáculoNEW! -32%
- Transmissor de pressão, controlo dos gases de escapeNEW! -32%
- Radiador -31%
- RedutoresNEW! -27%
- Sistemas de travagem
- Pastilhas de travãoNEW!
- Jogo de reparação, pinça de travãoNEW!
- Jogo de maxilas de travãoNEW! -32%
- Cabo de aço, travão de estacionamentoNEW!
- Tubo flexível de travãoNEW! -36%
- Bomba central dos travõesNEW!
- Interruptor de luz de stopNEW!
- Kit de acessórios, maxilas de travão de estacionamentoNEW!
- Jogo de reparação, afinação automáticaNEW!
- Indicador de desgasteNEW!
- Bomba de vácuo, sistema de travagemNEW!
- Servo-freioNEW!
- Cabo de aço, travão de serviçoNEW!
- Peças da direção
- Braço de controloNEW! -35%
- Tirantes da barra estabilizadoraNEW!
- Ponta do tiranteNEW!
- Articulação de suspensão/guiaNEW!
- Casquilho de apoio, braço transversalNEW! -35%
- Barras de direcçãoNEW!
- Fole, direcçãoNEW!
- Parafuso de correcção do camberNEW!
- Jogo de reparação, suspensão da rodaNEW!
- Jogo de foles, direcçãoNEW!
- Barra/escora, suspensãoNEW! -35%
- Suspensão, corpo do eixoNEW!
- Peças elétricas
- Vela de igniçãoNEW!
- Sensor de ABSNEW!
- Sensor de posição da cambotaNEW!
- Bobina de igniçãoNEW!
- Sensor, temperatura do líquido de refrigeraçãoNEW!
- AlternadorNEW!
- Sonda lambdaNEW!
- Motor de arranqueNEW! -27%
- Sensor, pressão do óleoNEW!
- Medidor do fluxo do arNEW!
- Sensor da pressão de admissãoNEW! -35%
- Interruptor de luz de stopNEW!
- Sensor, temperatura exteriorNEW!
- Sensor de detonaçãoNEW!
- Sensor, pressãodos gases de escapeNEW! -35%
- Relé multifunçõesNEW!
- Bomba de alta pressãoNEW!
- Bomba de água do lava-vidrosNEW!
- Sensor, temperatura do habitáculoNEW!
- Válvula, sistema de admissão de ar secundárioNEW!
- Conector, unidade de comando da caixa velocidades automáticaNEW!
- RPM Sensor, engine managementNEW!
- Câmara de marcha-atrás, auxiliar de estacionamentoNEW!
- Sensor de chuvaNEW!
- Bateria de arranque
- Battery booster/Jump starter
- Battery testers & chargers
- Cabo auxiliar de arranque
- Carregador de baterias
- Conjunto, caixas de fichas
- Electrical appliances
- Fusível
- Inversor
- Sensores/interruptores(transmissores)
- Peças térmicas
- TermostatoNEW!
- Radiador -31%
- Bomba de águaNEW!
- Ventilador do habitáculoNEW! -32%
- Condensador, ar condicionado
- Tubo flexível do radiadorNEW!
- Fecho do radiadorNEW!
- Resistência, ventilador do habitáculoNEW!
- Compressor do ar condicionadoNEW!
- Ventilador do radiador -19%
- AquecimentoNEW!
- Caixa do termóstatoNEW!
- Tubo do líquido de refrigeraçãoNEW!
- Radiador de óleoNEW! -34%
- SecadorNEW!
- Válvula de regulação do líquido de refrigeraçãoNEW!
- Interruptor de pressão, ar condicionadoNEW!
- EvaporadorNEW!
- Válvula de expansãoNEW! -35%
- Junta, termóstatoNEW!
- Junta, bomba de águaNEW!
- AnticongelanteNEW!
- Radiador de baixa temperatura, radiador ar sobrealimentaçãoNEW!
- Tampão de fecho, flange de líquido de refrigeraçãoNEW!
- Junta, caixa de válvulas de borboleta do aquecimentoNEW!
- Jogo de juntas, bomba de águaNEW!
- Air conditioning bearing
- Oring set
- R134a
- Motor
- Bujão roscado, cárter de óleoNEW!
- Junta, tampa das válvulasNEW!
- Retentor, cambotaNEW!
- Junta, colector de admissãoNEW!
- Junta, cárter do óleoNEW!
- Jogo de juntas, haste da válvulaNEW!
- Válvula de controlo, regulação das árvores de camesNEW!
- Sensor, nível do óleo do motorNEW!
- Retentor, haste da válvulaNEW!
- Transmissor de pressão, controlo dos gases de escapeNEW! -32%
- Junta, termóstatoNEW!
- Regulador do veio de excêntricosNEW!
- Retentor, árvore de camesNEW!
- Junta, cárter de comandoNEW!
- Válvula de pressão do óleoNEW!
- Retentor, sensor do nível do óleo do motorNEW!
- Retentor, árvore de camesNEW!
- Vedação, ajuste da árvore de camesNEW!
- Retentor, camisa de cilindroNEW!
- Junta, entrada da turbina(compressor)NEW!
- Correias e polias
- Suportes de motor, transmissão e sistema de condução
- Molas de gasolina
- Sistemas de segurança
- Sistemas de limpa pára-brisas
- Peças do sistema de entrada de ar
- Sistema de exaustão
- Junta, tubo de escapeNEW!
- Fita de borracha, sistema de escapeNEW!
- Retentor, tubo de escapeNEW!
- Junta, saída de óleo (compressor)NEW!
- Transmissor de pressão, controlo dos gases de escapeNEW!
- Válvula, AGR controlo dos gases de escapeNEW!
- Válvula de comutação, borboleta dos gases de escapeNEW!
- Válvula, recirculação dos gases de escapeNEW!
- Outros
- JuntaNEW!
- Óleo do motorNEW!
- Regulador de tiranteNEW!
- Óleo de caixa de velocidades automáticaNEW!
- Óleo de caixa de velocidades automáticaNEW!
- TampaNEW!
- Placa de suporte do travãoNEW!
- Válvula, direcção assistidaNEW!
- Bolsa de transporte
- Bomba de alimentação manual
- Borne de polo da bateria
- Buzina de sinalização
- Cabo de massa, distribuidor de ignição
- Cobertura, terminal do borne da bateria
- Escova de arame, limpeza dos bornes da bateria
- Outros
- Tinta combinada para veículos
- Peças de tuning
- Espelhos e peças ligadas
- Equipamento interior para automóvel
- Sistemas de aquecimento
- Produtos químicos para automóveis
- Aditivo
- Agente refrigerante
- Body cosmetics
- Exterior care
- Glass washing
- Glue
- Hand care products
- Hand washing paste
- Interior cleaning
- Luvas
- Líquido de travões
- Mastique universal
- Panos de limpeza
- Polish wax
- SPRAY PAINTS AND CRUNTS
- Subcapa de protecção contra a ferrugem
- Technical fluids
- Transmissions oils
- Óleo de protecção anticorrosão
- Acessórios
- Accessories for mobile phones
- Acessórios
- Autocolante
- BOOSTER, Emergency Aid - Battery Bank
- Cabo de reboque
- Caixa de tejadilho
- Car flags
- Car seat covers
- Children's goods
- Clamps and ties
- Copo graduado universal
- Covers for car documents
- Electronic parking clock
- Escova de limpeza do veículo
- Esponja
- Extintor
- Farolim rotativo
- Fefrigerators and cooling boxes
- First aid kit
- Fita isoladora
- Flashlights, lamps
- Indicators
- Inner tubes
- Interior freshener
- Isqueiro
- Kit de porta-chaves
- Lamps
- Lamps LED
- Lights XENON
- Mobile phone charger- powerbank
- Multimedia
- Multímetro
- Parking assistant system
- Parking clock
- Pets
- Pá
- Raspador de gelo
- Reflector
- Rudder cover
- Rádio
- Stickers and car identification
- Suporte de barra de esfera, dispositivo de reboque
- Suporte de tejadilho
- Tape
- Tint films for car
- Vacuum Cleaners
- Vasilha de água
- Ventilador
- Warn jacket
- Warning triangle
- Winches
- Wipes
- Óculos de protecção
- Rolamentos universais
- Produtos químicos e cosméticos
Esta peça () não existe na nossa base de dados ou tem um nome diferente.
Mostrar todas as peças de substituição
Mostrar todas as peças de substituição